DIY Drink Caddy Pre-cut Kit - BEGINNER LEVEL

Ready to ship in 3-4 days from order. The number of kits is limited, so be sure and reserve yours before they run out!

DIY Drink Caddy Kit pieces are precut from solid pine (no plywood or MDF) and pre-sanded to 60 grit. Basic hardware (eg. screws, bottle opener attachment, etc.) is included. Access to kit instruction video will be provided via QR code with your purchase at time of shipment.

No cutting or sawing is required for this kit since all pieces are precut to the required dimensions.

Recommended tools NOT included with the kit:

• Small power drill (recommended) or Phillips screwdriver
  • Phillips head #2 screwdriver drill bit (Phillips looks like the shape of a crisscross)
  • Screws will be provided with the kit and all holes pre-drilled
• Sandpaper block(s) (not required but will save your hand!) and sandpaper grits at minimum: 80 grit, 120 grit, 180, 220 grit; also a tack cloth for wiping off excess sandpaper, but not required
• Cloth for wiping up excess glue
  
• Bottle of Titebond II Premium Wood Glue (with the blue label)
  

All kit pieces will be unfinished (eg. raw wood) and may be finished as you prefer (eg. stain, paint, epoxy, etc. - finishing materials are not provided and will be your responsibility to obtain separately). You are free to customize your work in your own way. Use your imagination!

Please indicate above if you do or do not want the pre-drilled holes for the bottle opener on the side. If the section is skipped with no preference indicated, the kit WILL include the pre-drilled holes for the bottle opener. There is no price difference either way.